Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connecting to excel by OLE

Created by: plenc at: 11/18/2008 9:26 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/18/2008 9:26 AM	Rate (0)
plenc Posts: 37 Rating: (0)	Hello, I have the problem: In excel 2003I had made the file and saved it on my C:\. Then in WinCCI use OLE element to insert the excel file. I insert that by open by file option andI also choose "connect" option to have a possibility to meke the onlne change in excel file. When I start runtime WinCC the values from the excel file is displayed corect butI can't make a change of this value. During runtime i open the excel file and try to change tehe values but in WinCC they are still the same. Best Regards, P.
plenc Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

11/21/2008 8:14 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi perhaps this FAQ can help http://support.automation.siemens.com/WW/view/en/15049230 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on