Connecting to Logo 0BA8 with new IOS App 3.x

Hi There,

I'm trying to connect from the internet with the new App.

I have set up the NAT and Rules on my firewall and forwarded port 8080. 

I can connect to the Logo just fine (green status) and I can look at the VM \ IO Status \ Web server etc. but I can't seem to use the Control Page where my items show a Yellow status.

They work fine on the LAN

I did a packet trace and I can see the App talking to the Logo! over 8080 and I don't appear to be dropping any requests for anything.

I see someone mentioning to forward 10001 on another post - I did this too but do not see any traffic being sent over these ports.

Has anyone got this working?

Thanks

Justin

Here you cn download the manual for the app.

https://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/Documents/logo_app_en.pdf

Yes, I have done all that.

Also as I said I can connect and control all functions from the Local LAN which would make be believe it's not a permissions problem.

More than likely it is something to do with the networking and possibly what's not being forwarded through the firewall but it's very strange that I can connect to the unit and do everything except operate functions on the control page.

Hi,

I got to the bottom of this.

I originally set this up and tested using the internal IP of the Logo!.

Then I configured my firewall and routing and CHANGED the IP in the app to the Public IP.
I did not recreate the Controls - and then they did not work.

However when I deleted my original connection and recreated this with the Public IP and deleted my controls and recreated them from scratch it now works!

Thanks

Justin