Navigation

Connecting with S5 controller throw Ethernet-Com adapter

Created by: bandr at: 10/4/2021 11:59 AM (1 Replies)

10/4/2021 11:59 AM	Rate (0)
bandr Experienced Member Joined: 9/19/2014 Last visit: 11/13/2023 Posts: 70 Rating: (0)	Good afternoon. Has anyone tried connecting to step 5 using Windows 10 with and win XP virtual machine and using an Ethernet to COM adapter. I made several connection attempts using a converter from Siemens 6es5 734-1bd20 and USB-COM adapters. The picture is always the same. The connection starts working with the new USB COM adapter and then the adapter smoothly dies within half an hour. Apparently some kind of conflict. Here on the forum I read the old branches that this is impossible. I did it, but only for a short time. Therefore, the idea arose to try an Ethernet-COM adapter. Who will advise what?

Suggestion To thank Quote Answer

10/4/2021 12:48 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/4/2024 Posts: 33876 Rating: (4213)	Take a look at the IBHsoftec.com. IBH Link S5++

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users * Woodfritz *