GB2020

Hello

ask: how to change IP of LOGO 8.2? currently it is 192.168.0.33 and I would like to put 192.168.1.58

 Want you set the IP address of the LOGO! to same as your PC? That's wrong. The LOGO! and the PC must be in the same subnet, not in the same IP address.

The IP adress has 4 segments.

XXX.YYY.ZZZ.nnn

XXX.YYY.ZZZ are the the subnet address, nnn ist the device address.

Il mio problema nasce al fatto che ilmio LOGO ha ora 192.168.0.33 e il mio pc ha 192.168.1.58.

quando vado a caricare il programma con logo confort   mi chiede di cambiare IP del Pc io gli do OK e mi cambia in 192.168.0.254. Tutto bene e tutto mi funziona.

Ora vorrei attivare il comando a distanza  vado in internet, http:// 192.168.0.33:8080 e mi  dovrebbe apparire limmagine di Logo 8.2. Questo comano non lo prende in nessun modo. sono giorni che provo di tutto senza risultato.

Per questo motivo volevo cambiare iP di Logo 8.2 in 192.168.1. nn  mi metto nella sottorete del mio server e volevo vedere se mi attivava da internet  http://192.168.1.nn.

Sono stato chiaro?

Chiedo come si fa a riportare LOGO 8.2 ai valori di fabbfrica?

In order to use remote control, it is not enough to enter the port number of the LOGO! after the IP address, e.g. 192.168.1.33:8080.
The router blocks this call.
You have to activate port forwarding in the router, e.g. port 8080 to 8080. Then the external port 8080 is forwarded by the router to the internal port.
But then I would advise against you. You open all gates for hackers through the forwarded port.
It is better to use DynDNS or VPN for remote control.

I have opened a new program and now I try to install it in logo 8.2.

[snip]

here comes the problem. in fact if I put 192.168.1.33 and not 192.168.0.33 I can't access Logo 8.2 and I can't directly enter 192.168.1.33 from 8.2.

Hello,

Look at Youtube video how to change IP link HERE.

I think your LOGO! is in operator modus, not in admin modus.

In operator modus you have not the complete menues of the LOGO!.