hello.....,

with tia portal i try so reach my ktp 400 but i am unable to download to it.  i can make it flash

but somehow. i don't know .....

anyone idea what it can be.  or which steps to find the problem

gerard32

hello.....,

with tia portal i try so reach my ktp 400 but i am unable to download to it.  i can make it flash

but somehow. i don't know .....

anyone idea what it can be.  or which steps to find the problem

 Hi gerad32 ,

From attached image the configured IP address in software  project is 192.168.0.2  and actual IP address on hardware is 192.168.0.35.

We need to make it same in Program or at actual HMI hardware also confirm that model no is same in Program.

Br,

AmolG.

he thanks

can you explain this some more: "also confirm that model no is same in Program"

also i made the ip adresses the same   35 at the end  ,, see screenshot .. stil problem

at the top is see slot 5 X1.  i never noticed this

in the "online status information" i see '1 problem found'    ... i wonder what is this problem

Hello.

There are two generations of KTP400, if I recall correctly. Just make sure that the order numbers of design and instrument correspond.

I find it best to change the IP address on the instrument to the required address. This is also set to a fixed address instead of auto selected one. There are less issues that way.

Finally - set the IP address of your PC (and whatever hub or switch you are using) to a fixed address.

Hello Gerard,

is the panel in Transfer Mode?

Regards,

Frink

gerard32

he thanks

can you explain this some more: "also confirm that model no is same in Program"

also i made the ip adresses the same   35 at the end  ,, see screenshot .. stil problem

at the top is see slot 5 X1.  i never noticed this

in the "online status information" i see '1 problem found'    ... i wonder what is this problem

 Please provide below information it will be helpful.

1.Which TIA Version/Update Software you are using.Screenshot from installed software

2.Article no of HMI.

Please check attachment hope it will help you.

very strange, yesterday evening i was fooling around with it and suddenly it worked, this evening i tried again but problems again and i was searching wat it could be but with no result. i also changed 'obtain ip adres automatically'  from my laptop to fixed ip adres but with no result 

so i used the pdf file in previous tips and decided to change the ip adress from 192.168.0.35 to  192.168.0.32 and it worked  i decided to change it back to 192.168.0.35 and this time it also worked. so strange.  if you ask me than it seemed to be that there was something stuck in the software

one thing iam not sure of is the software version i use (pdf file page 1)  i also choosed v 15.0.0.0 but i'am unable to find it what version i exactly use.  and my ktp400 is 4 years old so i would not suprised if i have an older version 

gerard32

very strange, yesterday evening i was fooling around with it and suddenly it worked, this evening i tried again but problems again and i was searching wat it could be but with no result. i also changed 'obtain ip adres automatically'  from my laptop to fixed ip adres but with no result 

so i used the pdf file in previous tips and decided to change the ip adress from 192.168.0.35 to  192.168.0.32 and it worked  i decided to change it back to 192.168.0.35 and this time it also worked. so strange.  if you ask me than it seemed to be that there was something stuck in the software

one thing iam not sure of is the software version i use (pdf file page 1)  i also choosed v 15.0.0.0 but i'am unable to find it what version i exactly use.  and my ktp400 is 4 years old so i would not suprised if i have an older version 

Hi Gerad32,

May be there are some Ethernet network related issue.Have you tried to download in HMI with Same version of TIA from other Laptop.

Please provide below information it will be helpful.

1.Which TIA Version/Update Software you are using.Screenshot from installed software

2.Article no of HMI.

Br,

AmolG