Navigation

Connection with sensors

Created by: rewa at: 3/28/2012 10:45 AM (11 Replies)

4/17/2012 9:22 AM	Rate (0)
rewa Posts: 37 Rating: (0)	Hey, I actually pointed what Kev had told, that digital modules was used for such encoders, the concept which I also had was what you told well before..!!..ty for ur time and replies.. ~REWA~
rewa Posts: 37 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users TIBI68

4/17/2012 9:43 AM	Rate (0)
TIBI68 Gold Member Joined: 12/1/2009 Last visit: 10/27/2024 Posts: 672 Rating: (147)	You are welcome rewa ! Another important thing that you should consider for your application. You wrote that you want to control the speed of the drive with digital outputs. Well, that might work. And again this is pending on your application. I give you the advise to use an analog output instead, where you can control the speed of the connected drive exactly. Of course the drive has to support that signalas well. Regards.
	Give us your feedback and show us your respect! We take our free time to support you with our knowledge and experience. If this post is helpfull to you kindly click on "Rate" or "Thank".
Suggestion To thank Quote Answer