Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connectivity pack v6.2 with XP SP3

Created by: sandromig at: 11/3/2008 1:13 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/3/2008 1:13 PM	Rate (0)
sandromig Posts: 21 Rating: (0)	Hy to all. I have a computer running xp sp3 with wincc v6.2 HF5 with connectivity pack v6.2. It has also Sicam pascc installed. With windows xp sp2 the connectivity pack works fine, i'm using it to make alarm export at the end of the daywith a time triggered event. In a fresh installation of Windows xp sp3 it doesn´t work, and have a no-identifiedproblem running the scritp and a problem overinstalation. I try to install the additional components and the MDACv2.8 SP1 can´t install over SP3. Does anyoneknow any solution? Best regards
sandromig Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/3/2008 1:43 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, its not released for XP Sp3 see compatibility FAQ http://support.automation.siemens.com/WW/view/en/21927773
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

11/3/2008 1:47 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	April is 100% correct there. And here is the info on how to remove SP3. Microsoft link.
JMJ Posts: 487 Rating: (45)	Last edited by: JMJ at: 11/3/2008 1:48 PM
Suggestion To thank Quote Answer

11/3/2008 4:59 PM	Rate (0)
sandromig Posts: 21 Rating: (0)	Format c:/ on the way...... Thanks!
sandromig Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on