Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Control of double motor module via two different CU320

Created by: AutoGen_9232947 at: 7/23/2019 11:23 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/23/2019 11:23 AM	Rate (0)
AutoGen_9232947 Regular Member Joined: 3/12/2018 Last visit: 3/2/2024 Posts: 23 Rating: (0)	Hello, I am using double MoMo (9A/9A) for my system and would like to control each Inverter of double MoMo through different CU320-2 DP. Kindly let me know if control in such way is possible? For better understanding image is attached. Regards, Attachment Double MoMo.jpg (44 Downloads)

Suggestion To thank Quote Answer

7/23/2019 11:27 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/8/2024 Posts: 22399 Rating: (3017)	hello, this configuration is not possible. regards christoph

Suggestion To thank Quote Answer

7/23/2019 11:47 AM	Rate (0)
AutoGen_9232947 Regular Member Joined: 3/12/2018 Last visit: 3/2/2024 Posts: 23 Rating: (0)	thank you very much for prompt reply....

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on