Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

convert int to time problem

Created by: Float_Boy at: 7/3/2013 12:35 PM (2 Replies)

Rating (3)

Thanks 4

3 Entries

7/3/2013 12:35 PM	Rate (0)
Float_Boy Posts: 14 Rating: (0)	i have s7-1200 plc and i want to take dint number and convert to time how can i do that? so when i will set value like 1 at the dint parameter and in the time parameter it will be 1 second
Float_Boy Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

7/3/2013 1:18 PM	Rate (2)
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 7/23/2024 Posts: 519 Rating: (83)	Float_Boy i have s7-1200 plc and i want to take dint number and convert to timehow can i do that?so when i will set value like 1 at the dint parameter and in the time parameter it will be 1 second Your DINT count will be consider as ms in TIME data type. . So multiply DINT with 1000 and move this multiplication output to TIME tag. . If you are giving time Setpoint from HMI then no need to do multiplication in PLC. . In HMI Just apply linear scaling to particular TIME tag value. .
	Regards, BhaPraJ
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mr.Be Padre Dimitry

7/3/2013 1:44 PM	Rate (1)
BryanG2001 Posts: 113 Rating: (22)	Also I think you will need the T_CONV instruction under Extended instructions / Date and time-of -day.
BryanG2001 Posts: 113 Rating: (22)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users rahimm kdb__

|

Share this page:

Share this page on...

Follow us on