Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

convert program from TIA to( S7 and winccflexable)

Created by: mokhakram at: 8/16/2014 9:49 AM (3 Replies)

Rating (1)

Thanks 1

4 Entries

8/16/2014 9:49 AM	Rate (0)
mokhakram Posts: 21 Rating: (0)	please i have siemens 300 plc system with TIA an to convert program from TIA to( S7 and winccflexable)
mokhakram Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/16/2014 10:20 AM	Rate (1)
William_B Posts: 5225 Rating: (1192)	mokhakram please i have siemens 300 plc system with TIA an to convert program from TIA to( S7 and winccflexable) Hi there. This is an ugly problem you are telling us about. Converting from "old" to "new" can be done but doing "new" to "old" is not made possible. Suppliers does not like it when we users move "backward". My suggestion for Step7 TIA >> Step7 V5.x is to convert LAD and FBD code to STL and copy-paste between the softwares. SCL should work too. This will take time but should be possible. Converting WinCC TIA >> WinCC Flexible,,,, re-engineering (opinion). Measure how many hours will be spent for doing this. Consider if it would be more cost effective to give/sell the TIA software to whom requires of you to make the convertion. Sorry for the bad news. w
William_B Posts: 5225 Rating: (1192)
Suggestion To thank Quote Answer

8/16/2014 10:50 AM	Rate (0)
mokhakram Posts: 21 Rating: (0)	thanks for all but really i need this conversion from new to old if u have criteria pls help me
mokhakram Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/16/2014 10:52 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	mokhakram thanks for all but really i need this conversion from new to old if u have criteria pls help me Not possible. Read williams post.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

|

Share this page:

Share this page on...

Follow us on