Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

convert program plc a Step 7 basic v10

Created by: PolpoMatic at: 4/5/2011 1:38 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/5/2011 1:38 PM	Rate (0)
PolpoMatic Posts: 1 Rating: (0)	I need convert program the plc mitsubishi (gx developer) to Siemens (Simatic Step7 Basic V 10). Exist the program? Necesito convertir un programa de un plc mitsubishi (gx developer) a un Siemens 1200 (Simatic Step7 Basic). Existe algun software o alguna herramienta que me lo haga mas facil. Gracias por ayudarme Saludos
PolpoMatic Posts: 1 Rating: (0)	Last edited by: PolpoMatic at: 1/4/2014 1:06 PM
Suggestion To thank Quote Answer

4/5/2011 1:49 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello, Unfortunately you should do this manually. Doesn't exist a "universal convertor" for this issue. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

4/15/2011 1:32 PM	Rate (0)
thomas.schipper Posts: 3 Rating: (0)	There is a online converter but its paid, but not as many as commercial companies www.plcconverter.com
thomas.schipper Posts: 3 Rating: (0)	Last edited by: thomas.schipper at: 4/15/2011 1:56 PM Last edited by: thomas.schipper at: 4/15/2011 1:56 PM
Suggestion To thank Quote Answer

4/15/2011 3:16 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	thomas.schipper There is a online converter but its paid, but not as many as commercial companies www.plcconverter.com That looks like it is a web site where you upload your files, and a person does the conversion and sends via email once you pay for it. It would be pretty cool to see a tool chain of conversion tools to go between various PLC types.
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on