Navigation

Convert TIA Portal in Wincc Flexible

Created by: FelipeFreire at: 12/15/2014 1:42 PM (1 Replies)

12/15/2014 1:42 PM	Rate (0)
FelipeFreire Regular Member Joined: 9/5/2014 Last visit: 4/3/2023 Posts: 11 Rating: (0)	Dear all, I would like to know if is possible to convert a HMI project developed using TIA Portal in a WinCC Flexible project. I need to do this because i want to use some TIA Portal screens in a WinCC Flexible Projet. Can anybody help me on this?

Suggestion To thank Quote Answer

12/15/2014 1:49 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/29/2023 Posts: 21946 Rating: (2927)	Hi, no this is not posible. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users FelipeFreire