Converting S7-200 to S7-1200: SM0.0 SM0.1 and SM0.5

Hello mal_er

You tried to put this fuction in different segments, You can have a problem with enable out.

bye.

IL FAUT PAS UTILISER MW0 DANS STATU PREMIER BLOC PARECEQUE VOUS AVEZ UTILISER LE PREMIERE BITE PRENDRE UNE AUTRE WORD ET IL VA FONCTION BIEN

Hi ari01,

I really appreciate it that you are trying to help 
For the next time I recommend to use English as language. This is an international community and we try to focus on one language. 

This is the translation of your post:

ari01

YOU MUST NOT USE MW0 IN FIRST BLOCK STATUS BECAUSE YOU HAVE USED THE FIRST BITE TAKE ANOTHER WORD AND IT WILL WORK GOOD

 Best regards,
Jen_Moderator

Denilson Pegaia

Hi,

In the conversion of a S7-200 program to a S7-1200, the SMs (e.g. SM0.0, SM0.1 and SM0.5) are not converted (stay just as symbolic name, without address). A quick workaround could be given for this case:

In the device configuration, CPU properties, Topic System and clock memory, topic “System and clock memory” enable System memory bits and Clock Memory bits. Choose not used by S7-200 program memory bytes..

In the program, set addresses to not converted SM (based in the open definition):

S7-200 SM0.0 corresponds to S7-1200 variable defined as “Always 1 (high)”
S7-200 SM0.1 corresponds to S7-1200 variable defined as “Always 0 (low)”
S7-200 SM0.5 corresponds to S7-1200 variable defined as “1 Hz clock”

Siemens Automation User

 

Denilson Pegaia

Hi,

In the conversion of a S7-200 program to a S7-1200, the SMs (e.g. SM0.0, SM0.1 and SM0.5) are not converted (stay just as symbolic name, without address). A quick workaround could be given for this case:

In the device configuration, CPU properties, Topic System and clock memory, topic “System and clock memory” enable System memory bits and Clock Memory bits. Choose not used by S7-200 program memory bytes..

In the program, set addresses to not converted SM (based in the open definition):

S7-200 SM0.0 corresponds to S7-1200 variable defined as “Always 1 (high)”
S7-200 SM0.1 corresponds to S7-1200 variable defined as “Always 0 (low)”
S7-200 SM0.5 corresponds to S7-1200 variable defined as “1 Hz clock”