Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

converting this configuration to hot swapping / change module during operation

Created by: AutoGen_972555 at: 12/15/2015 3:40 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/15/2015 3:40 PM	Rate (0)
AutoGen_972555 Posts: 1 Rating: (0)	Please I need help in converting this configuration to hot swapping / change module during operation [snip] ... Thanks Mohammad Elnewehi Attachment S7300_and_2nd.zip (191 Downloads)
AutoGen_972555 Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 12/30/2015 9:45:03 AM documents as attachment
Suggestion To thank Quote Answer

12/29/2015 12:44 AM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hello, The only way to get it hot swapable is to use a ET 200M PN HF Interface module together with PROFINET and the Busmodule on a active backplain. Behind the CPU or a IM36x it is not possible to get it hotswapable!
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on