Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Copy image to an new IOT2050 "No space left on device"

Created by: rfond at: 4/15/2021 5:59 PM (1 Replies)

Rating (0)

Thanks 3

2 Entries

4/15/2021 5:59 PM	Rate (0)
rfond Advanced Member Joined: 6/8/2018 Last visit: 12/17/2024 Posts: 113 Rating: (5)	I'have a problem when y wan't to copy image to an new IOT2050. dd: writing to '/dev/mmcblk': No space left on device The copy of mmc is 15,2 Go while memory of eMMC = 14.8 ------------------------------------------------------------------------------------------ Split from Create image from eMMc.
	Last edited by: Jen_Moderator at: 04/16/2021 08:28:40 New subject after splitting
Suggestion To thank Quote Answer

4/16/2021 8:48 AM	Rate (0)
rfond Advanced Member Joined: 6/8/2018 Last visit: 12/17/2024 Posts: 113 Rating: (5)	I've resolved my problem, i do a compressed image with commande: To create image : dd if=/dev/mmcblk1 \| gzip -v6 \| dd of=/mnt/USB/save.gz -> 7Go To apply image : zcat /mnt/USB/save.gz \| dd of=/dev/mmcblk1 It's works
	Last edited by: Jen_Moderator at: 04/16/2021 10:31:25 Edited text for better reading.
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Jen_Moderator bergmanu Fe_lipe

|

Share this page:

Share this page on...

Follow us on