Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

copy&paste wincc comfort faceplates?

Created by: DAMISU at: 9/27/2013 1:40 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/27/2013 1:40 PM	Rate (0)
DAMISU Posts: 1 Rating: (0)	Hi! I need to copy a Faceplate, paste and rename it like another one. With TIAP v12 SP1 is imposible to do it, but I think that is it a very usefull. Is it possible to copy&paste wincc comfort faceplates?
DAMISU Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 9/27/2013 2:00 PM new subject after splitting from /tf/WW/en/Posts/98353#top
Suggestion To thank Quote Answer

9/27/2013 1:52 PM	Rate (0)
seguin Posts: 4 Rating: (0)	Hi!! I have the same problem,any idea?
seguin Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/27/2013 2:12 PM	Rate (0)
Wesley_Bosch Advanced Member Joined: 10/7/2009 Last visit: 11/18/2024 Posts: 7 Rating: (1)	I'm also having this problem. I have made a support request for this problem (27-09-2013) but there is still no sollution. the problem is sent to the development department

Suggestion To thank Quote Answer

10/28/2013 1:28 PM	Rate (0)
henk_d Posts: 6 Rating: (0)	Hello, I just had the same problem, so I opened the original faceplate and a new, empty faceplate. After that I copied the graphical part of the original and pasted it into the empty one. After this just manually create the properties with the same nameand ... magic, they automaticly connect as in the original. Hope it works for u to. Regards, Henk
henk_d Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

4/24/2014 5:00 PM	Rate (0)
Floeren Posts: 3 Rating: (0)	Is there already a solution for this probem?
Floeren Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/25/2014 1:47 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, with wincc v13 you can duplicate faceplates. K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on