Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Counter Module FM350-2

Created by: Saravana kumar at: 2/6/2009 12:09 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

2/6/2009 12:09 PM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	Hello, i m using FM 350-2 counter module in the continous counting mode.I m using 20ms on delaytimer to reset the counter if it reaches the value 2.The conter is connected to a proximity switch, when the proximity input frequency is slower the counter is getting resetted properly but once proximity input frequency incresees FM 350-2 is not getting reset. Is there any other medhod to reset the FM 350-2 conter module.
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

2/9/2009 7:56 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Whatfor do you need such functionality? To eliminate low frequences?
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

2/9/2009 8:06 PM	Rate (0)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (308)	Hello, Can you tell where the proximity switch is connected? Do you use a Gate input, or another input? What is the cycle time of the PLC?
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

2/11/2009 5:48 AM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	The proximity is connected at the channel 0 of the FM 350-2. I am using only software gate to enable counter module. PLC is CPU 417-4DP of 1 ms scan cycle time.
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

2/11/2009 8:37 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	FM 350-2. (S7-300 series) CPU 417-4DP (S7-400 series) Errr, did i miss something? :^)
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

2/16/2009 9:41 AM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	Nothing missed ok.
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on