Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Coupling a KTP400 with a S7-1500

Created by: Kelu at: 11/18/2013 3:35 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

11/18/2013 3:35 PM	Rate (0)
Kelu Posts: 88 Rating: (12)	Hello all, I just tried to connect a KTP400 with a S7-1500 and I can't. I can do that with a S7-1200, a S7-300/400 but not with a S7-1500. I have check in technical data of KTP400 and it seems that it will be ok with a S7-1500 (process coupling S7-1500 = YES). I don't understand. Can somebody know why? Thank you Best regards,
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

11/18/2013 4:31 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, which software do you use? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

11/18/2013 4:37 PM	Rate (0)
Kelu Posts: 88 Rating: (12)	I use TIA V12 SP1 with Step7 Pro and WinCC advanced Rgds, Kelu
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

11/19/2013 4:57 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, With V12 it should be possible to do this connection. what exactly are your problems? can you connect the hmi with plc in programming? or can't you access data from plc in runtime? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Kelu

11/20/2013 8:39 AM	Rate (0)
Kelu Posts: 88 Rating: (12)	Hello K!ke, You was in the good way thank you it is a problem with versions. The program was first develop in V11, and later, I launch it with V12. TIA made an automatic update between both version. But apparently it doesn't good updated the hardware. I make "change device/version" with the same HMI and now I can make the HMI_connection in the Network view. Rgds, Kelu
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on