Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP 1430 TF or TCP

Created by: Desertec at: 8/24/2009 11:34 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/24/2009 11:34 PM	Rate (0)
Desertec Posts: 7 Rating: (0)	Hello I am looking for the manual for CP1430 , I 've that this module has obseleted from the the product , even the manual , I tried to get from add-ons ,but it gives me handbuck (exe) and I am not able to open . please if some body have , or could I use CP 1430 TF instead ?
Desertec Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

8/25/2009 12:21 PM	Rate (0)
gcor Advanced Member Joined: 7/17/2008 Last visit: 10/25/2013 Posts: 34 Rating: (2)	Hello, Attached you can find the manual Keep in account that you need the software COM 1430 aswell Regards Attachment CP 1430 TCP with NCM COM 1430 TCP_e.pdf (475 Downloads)

Suggestion To thank Quote Answer

9/7/2009 9:35 AM	Rate (0)
Desertec Posts: 7 Rating: (0)	Hello , Thanks for the manual , I would like to ask one question more? the s5 EPROM for CPs or CPU could be damaged ? and if it damaged , what will be the outcomes ?
Desertec Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

9/17/2009 8:40 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, Loo at this info about damaging of EPROM: I strongly advise to check the blackening of the EPROM window. If the window isn't covered entirely with a lightshielding tag, it is possible the contents of the EPROM are changed. The construction of these PLC's is open to enable airflow for cooling. But if the air can pass through, so can light! And even a simple TL tube gives enough UV out to damage EPROMs over a certain period of time. Regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on