Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP 313 C -> CP5611 Problem

Created by: yechu at: 3/26/2009 7:54 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/26/2009 7:54 AM	Rate (0)
yechu Posts: 29 Rating: (1)	Hi, I have CP313-C, CP5611 and SCADA WinCC V6.0. I want to communicate the PLC to SCADA via CP5611 through (MPI). I tried myself, but it's not communicate. At the same time, I connect the MPI adapter for communicating PLC to Step7. It's working.i am able to communicate plc to scada through MPI Adapter, but i am failing through CP5611 card. Regards yechu
yechu Posts: 29 Rating: (1)
Suggestion To thank Quote Answer

3/26/2009 12:12 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/1/2023 Posts: 8596 Rating: (1140)	Dear yechu, Have you seen this link: what are the requirements for an online connection between WinCC and an S7 with MPI (CP5611)? Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on