Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP 340 RS484 and Printer communication

Created by: Gosai at: 4/14/2009 9:09 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/14/2009 9:09 AM	Rate (0)
Gosai Posts: 61 Rating: (0)	Dear All, I would like to know, whether below mentioned combination will work or what problems might come. Option 1: CP 340 RS485--> Printer over ASCII protocol Option 2 : CP 340 RS485--> Printer over Printer Protocol. Option 3: Can I use single CP card for multiple Printers over ASCII / Printer protocol.?? Kindly suugest the correct solution. Note: Distance between PLC and Printer is more than 20m.
Gosai Posts: 61 Rating: (0)
Suggestion To thank

4/28/2009 10:08 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/22/2025 Posts: 4114 Rating: (195)	close cause question posted twice. The second thread with the subject CP 340 RS 232 can be connected to all kind of Printer?is published within the same conference . Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on