SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

CP 343-1 and WinCC Flexible or WinCC 6.2

2/29/2012 1:39 PM	Rate (0)
Bulent06 Member Joined: 5/23/2010 Last visit: 2/22/2024 Posts: 4 Rating: (0)	Hello, I want connection to the CPU 315-2DP with CP 343 ethernet module. I tried with WinCC 6.2 and WinCC Flexible. But I was not successful for the connection. Do you have an example programs? or How can I it? Best Regards.

Suggestion To thank Quote Answer

2/29/2012 2:10 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 2/26/2025 Posts: 5697 Rating: (716)	Hello, Attached the settings of a working project, wincc 6.2 and cpu 315 with ethernet card. Regards, Marcjan Attachment connection.pdf (172 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

2/29/2012 2:26 PM	Rate (0)
Bulent06 Member Joined: 5/23/2010 Last visit: 2/22/2024 Posts: 4 Rating: (0)	Dear Marcjan, I configrated like you. I am using CP 343-1 Lean. I installed Simatic NET 6.4. I am triying directly connection to the CP 343 with network cable. Have you connected with your desktop pc or notebook? Thanks.

Suggestion To thank Quote Answer

2/29/2012 2:54 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 2/26/2025 Posts: 5697 Rating: (716)	Hello, Yes connection works, only thing is i use a switch because i havemore PLC's in the network. Perhaps a crosscable works in your case. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

7/2/2013 7:20 PM	Rate (0)
bbc91 Posts: 25 Rating: (2)	did you manage to establish the connection using 343-1 ?i have the same problem...please help!
bbc91 Posts: 25 Rating: (2)
Suggestion To thank Quote Answer

7/10/2013 12:42 PM	Rate (0)
Rated X Posts: 1547 Rating: (129)	Hi, please post some more information about your system configuration, IP Settings (PC and PLC) and if possible create the same screenshot as in post above from your system.
Rated X Posts: 1547 Rating: (129)
Suggestion To thank Quote Answer

7/10/2013 12:48 PM	Rate (0)
playerslight Posts: 1064 Rating: (72)	one thing to watch is they all have tohave the same subnet maskor they won't work
playerslight Posts: 1064 Rating: (72)	Last edited by: playerslight at: 7/10/2013 12:50 PM
Suggestion To thank Quote Answer

7/10/2013 12:53 PM	Rate (0)
S7 AUTOMAN Posts: 515 Rating: (56)	hi, as Playerslight suggested, make sure that all the devices(namely the CP 343-1 and the PC) falls under the same network ID/subnet. And then from your PC try to ping the IP addresses of the CP card and see wheteher you are getting any response from it. if yes then you can verify that your hardware/physical connection is ok. Next is to look at your software configuration/connections settings.
S7 AUTOMAN Posts: 515 Rating: (56)	Last edited by: shazin at: 7/10/2013 12:53 PM
Suggestion To thank Quote Answer

Share this page:

Share this page on...