Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP 527 Issue

Created by: AutoGen_330375 at: 11/11/2018 3:40 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/11/2018 3:40 PM	Rate (0)
AutoGen_330375 Posts: 8 Rating: (0)	Greetings S5 experts, I have a client that want to upgrade his old Siemens pc to a new one. He uses CP527 card for the visualization and the respective panel as shown in the attachment. I managed to make an upload of the panel via COM GRAPH software but I’m struggling to see where I can see the editor of the HMI screens in order to perform the upgrade and no to start from scratch. Basically I can’t find a literature for the COM GRAPH SW and I relay on pure intuition and help from friends and this is as far as got…. Please advise … Attachment S5 Panel.JPG (207 Downloads)
AutoGen_330375 Posts: 8 Rating: (0)	Last edited by: AutoGen_330375 at: 11/11/2018 3:41:07 PM Last edited by: AutoGen_330375 at: 11/11/2018 3:41:20 PM
Suggestion To thank Quote Answer

11/11/2018 4:03 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/6/2024 Posts: 33885 Rating: (4215)	I found a manual, but it is only in german language. Projektierungssoftware COM B+B GRAPH

Suggestion To thank Quote Answer

11/12/2018 8:09 AM	Rate (0)
AutoGen_330375 Posts: 8 Rating: (0)	ixo65 I found a manual, but it is only in german language. Projektierungssoftware COM B+B GRAPH WOW thanks a lot!!! Have you encountered s similar issue by the way?
AutoGen_330375 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on