Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP1613

Created by: fsquiccia at: 10/2/2008 3:39 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/2/2008 3:39 PM	Rate (0)
fsquiccia Posts: 1 Rating: (0)	Migration from Visual C++ 4.2 to Visual Studio 2008. We connect from PC XP Pro. to Simatic S5 with CP 143. We use H1 protocol (TF). Wich language in Visual Studio 2008? If the answer is Visual C++ 2008, are known compatibility problems?
fsquiccia Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/2/2008 4:01 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	Along with your 1613 card you would havereceived a SimaticNet PC Software CD. The 'readme' file in that CD will give you compatibility details. The section below is from SIMATIC NET PC Software CD, Edition 2008 Compilers supported: The following compilers can be used with the SIMATIC NET products under the following Windows operating systems: · Windows Server 2003 and Server 2008 32 Bit - Visual Studio 2005, C, C++; with OPC also C# and VB.NET - Visual Studio 2008, C, C++; with OPC also C# and VB.NET · Windows XP - Visual Studio 2005, C, C++; with OPC also C# and VB.NET - Visual Studio 2008, C, C++; with OPC also C# and VB.NET · Windows Vista 32 Bit - Visual Studio 2005, C, C++; with OPC also C# and VB.NET - Visual Studio 2008, C, C++; with OPC also C# and VB.NET Check this link below for details. https://support.automation.siemens.com/dnl/TI/TIzNzE2NzcA_31675909_Akt/Readme.htm#_Toc207710695
JMJ Posts: 487 Rating: (45)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on