Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cp343-1 and s7 cpu communication.

Created by: Deleted User at: 7/27/2009 12:39 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/27/2009 12:39 PM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Hello to all, is it possible to download hardware configuration (Upload PG to Station) via Cp 343-1 from CPU? i tried but it gives that error explained in photo. can i ask its why? Attachment New Bitmap Image.JPG (190 Downloads)
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer

7/27/2009 12:44 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hi, Its not possible. You should do like message box suggest. Upload only possible from CPU. If you know your configuration and want to upload only blocks then its possible to do it via CP343-1. You open CPU online. select all blocks, copy them and paste in offline project.
	Best regards, Darius
Suggestion To thank Quote Answer

7/27/2009 12:50 PM	Rate (0)
Deleted User Posts: 767 Rating: (69)	My cpu is 313c-2-dp, it does not have an ethernet port. So, does it mean i never can not upload station from my PLC using my PCs ethernet port?
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer

7/27/2009 1:17 PM	Rate (0)
naah Posts: 76 Rating: (8)	Hi, If your CP343 is properly configured and CPU has no error, you can. You must set under PG/PC Interface the online path via your CP343 card. The rest, upload/download is same as connecting via MPI. Good luck!
naah Posts: 76 Rating: (8)
Suggestion To thank Quote Answer

7/27/2009 1:24 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	naah If your CP343 is properly configured and CPU has no error, you can. You must set under PG/PC Interface the online path via your CP343 card. The rest, upload/download is same as connecting via MPI. Are you sure ? Download ok, I agree, upload online blocks ok, I agree, but not option "Upload station to PG". This works only connected to CPU.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on