Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP443-1 communication with a pc over Industrieel Ethernet

Created by: IwanvH at: 5/17/2010 12:26 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/17/2010 12:26 PM	Rate (0)
IwanvH Posts: 19 Rating: (0)	Hello, I have a CPU 414-2 with a CP443-1 and i want to have communication with a PC. On the PC is NCM installed. The software which i want to use is SIMATIC NET IE SOFTNET-S7 Lean edition 2008. Is there anyone who can help me? Iwan
IwanvH Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/17/2010 3:00 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello, Look at http://support.automation.siemens.com/WW/view/en/24968970 Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/17/2010 3:53 PM	Rate (0)
IwanvH Posts: 19 Rating: (0)	Hello Umencho, Take you for your respons. But can i do that with de softnet software?
IwanvH Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on