Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP524 with CP341

Created by: Buzz LightYear at: 7/30/2007 3:45 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/30/2007 3:45 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 11/25/2024 Posts: 83 Rating: (3)	Hello: Could the cp341 communicate to cp524 by 3964R protocal,? I've already knewin RK512 protocal is ok. Best regards BuzzLightYear ANPRO Automation Co. , Ltd TEL：+886-2-29995926 FAX：+886-2-29995929 Mobile Phone：+886-932018640 E-Mail Address： <mailto:vincentchang@anpro.com.tw> 5F/9,NO.14,Lane 609,Sec.5,Chung Hsin Rd, San Chung City,Taipei County,Taiwan,R.O.C

Suggestion To thank Quote Answer

8/8/2007 11:18 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, That must be possible, RK512 uses normally the P3964(R) for communicating, so the only thing is do you need the Redundancy Check or not.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

10/19/2007 10:42 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 11/25/2024 Posts: 83 Rating: (3)	Dear Late: Thanks for your reply . I will to try it again . Best regards Buzz LightYear ANPRO Automation Co. , Ltd TEL：+886-2-29995926 FAX：+886-2-29995929 Mobile Phone：+886-932018640 E-Mail Address： <mailto:vincentchang@anpro.com.tw> 5F/9,NO.14,Lane 609,Sec.5,Chung Hsin Rd, San Chung City,Taipei County,Taiwan,R.O.C

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on