Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP5613 Problem

Created by: alito at: 12/11/2009 2:27 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/11/2009 2:27 PM	Rate (0)
alito Posts: 22 Rating: (0)	Hi every body, I have a problem with a CP5613. I have Wincc flexible running in a PC with the CP5613, this connected to CPU 315-2DP and to ET200S (descentralized periphery). The complete system was working for 2 year, and now this happens: The CP5613 is initializated in the correct way (without being connected to the profibus bus), butwhen I connect the CP5613 to the bus, the green led flash fast. From manual I read " green flashing fast. Module not started (normal state after reset)." I have checked the bus, it's ok. So, What happens? How I can solve that? Recommended test for determinig if CP5613 is die? thanks in advance. note: sorry for my english
alito Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

12/17/2009 2:40 PM	Rate (0)
little holmes Experienced Member Joined: 12/9/2009 Last visit: 4/18/2024 Posts: 156 Rating: (11)	Hello, Maybe it helps whenyoudownload the configuration of the CP5613to the Configuration Station Editior again.

Suggestion To thank Quote Answer

12/23/2009 7:01 PM	Rate (0)
alito Posts: 22 Rating: (0)	yes, not only the configuration of the station again, I have formatted the system and reinstalled all the programs, and reconfiguring the Station (I have probed change the station configuration first but this not solve the problem). Thanks
alito Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on