Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 115 U eprom problem

Created by: smrana at: 2/17/2011 11:38 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/17/2011 11:38 AM	Rate (0)
smrana Posts: 13 Rating: (0)	i have use 2 same cpu 115U with same eprom software one i have 1 eprom and other is loss when i put out eprom from cpu its hve error how can i run cpu from with out eprom if not possible can i copy eprom from cpu with step5 ?
smrana Posts: 13 Rating: (0)	Last edited by: smrana at: 2/17/2011 1:23 PM
Suggestion To thank Quote Answer

2/17/2011 5:32 PM	Rate (0)
Ben Rad Bronze Member Joined: 7/28/2010 Last visit: 4/25/2023 Posts: 184 Rating: (11)	Hi, Your plc code is on that Eprom and plc can't run without it. You can make a copy from the other Eprom but you need Eprom Programmer from Siemens. Regards, Behnam www.sigmaprocess.ca

Suggestion To thank Quote Answer

2/18/2011 7:35 AM	Rate (0)
smrana Posts: 13 Rating: (0)	hi thanks dear
smrana Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on