Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 1214C REMAINING IN STOP MODE

Created by: Kiiza at: 12/3/2015 1:48 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

12/3/2015 1:48 PM	Rate (0)
Kiiza Experienced Member Joined: 11/17/2014 Last visit: 2/4/2023 Posts: 181 Rating: (0)	Hi guys, I have an S7 1200 CPU 1214C DC/DC/DC. When i powered it up first time, it remained in STOP mode. Am wondering, how do I put it to RUN mode? Thanks in advance!

Suggestion To thank Quote Answer

12/3/2015 3:24 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 2/7/2023 Posts: 8586 Rating: (1122)	Hello, You should use TIA Portal to put S7-1200 in RUN. When you change the propertie: Startup: Startup after POWER ON: Warm restart (RUN) It will try to start automatically, when power on. Best regards, Wizard

Suggestion To thank Quote Answer

12/3/2015 4:25 PM	Rate (0)
Kiiza Experienced Member Joined: 11/17/2014 Last visit: 2/4/2023 Posts: 181 Rating: (0)	Thanks a lot, it worked perfect

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Min_Moderator

|

Share this page:

Share this page on...

Follow us on