Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 313C-2DP interface port board damage.

Created by: joselmar at: 10/1/2009 5:41 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

10/1/2009 5:41 PM	Rate (0)
joselmar Posts: 3 Rating: (0)	I have a 313-6CE01-0AB0 and it has the SF led steady and the BF led blinking. I can't communicate with the PLC. When I checked the boards inside the CPUI found a resistor blown in the interface port. The board has a number on it, but I can't find it to buy a new one. The number is A5E0016629-1. Can I buy this board separately or I have to buy the entire CPU?
joselmar Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/1/2009 5:58 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	Hello, you will have to buy a new CPU or send in our CPU for repair. Contact Siemens: https://www.automation.siemens.com/mcms/aspa-db/en/Pages/default.aspx?HTTPS=REDIR

Suggestion To thank Quote Answer

10/5/2009 9:58 PM	Rate (0)
joselmar Posts: 3 Rating: (0)	This CPU is hard to find because it is discontinued. Which one is the most compatible with it? Where I can buy one? Thanks!
joselmar Posts: 3 Rating: (0)	Last edited by: joselmar at: 10/5/2009 9:59 PM
Suggestion To thank Quote Answer

10/6/2009 9:46 AM	Rate (0)
Bilao Posts: 378 Rating: (47)	As far as i know the most compatible CPU to yours is the 6ES7313-6CF03-0AB0 . But it is only partly compatible, because of the extended working memory. Hope this helps Best regards bilao
Bilao Posts: 378 Rating: (47)
Suggestion To thank Quote Answer

10/16/2009 5:00 PM	Rate (0)
joselmar Posts: 3 Rating: (0)	Hi: How I do the change from the 6es7313-6ce01-0ab0 to 6es7313-6cf03-0ab0? Which things I have to watch when I replace one with the other? The memory card works with the new one? Is a good choice do the version change? Any respond will be appreciate. I need to put the machine to work as soon as possible. Thanks!
joselmar Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/17/2009 6:14 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello, Basically you need just to change hardware configuration. To replace old type CPU with new one. (Of course, keep the same addresses.) Download new configuration and should everything to be like old CPU. Regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on