CPU 315-2 MPI+DP

Hello Body, 

I have a doubt about the ports in a CPU 315-2 DP, I am working in a technical proposal and select a HMI TP1200 comfort for this CPU (6ES7315-2AH14-0AB0) existing, in the Hardware Config this CPU have a Profibus network configured, although the manual says that the CPU have two ports X1 MPI and X2 DP, in the software only shows one (X2) , (look the picture), and I cant add a MPI net in the Hardware Config, how I can add the net MPI for the TP1200, or need a CP Profibus.

Thank you in advance

Hello,

in HWConfig open the properties of the PLC.

in the first tab "General" you configure the MPI Connection "Interface" -> "Properties".

The MPI is not shown in HWConfig, to see the net you must open netpro, here the Network is displayes you you can assign the panel to it.

Regards

Christoph

ChristophD

Thank you for your advice, was very useful.

My best regards