Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 315-2DP

Created by: cocu at: 6/16/2015 2:59 PM (8 Replies)

Rating (0)

Thanks 2

9 Entries

6/16/2015 2:59 PM	Rate (0)
cocu Advanced Member Joined: 6/12/2015 Last visit: 3/16/2024 Posts: 20 Rating: (0)	First of all many thanks to anyone that helps in this forum. I'm new to programming PLC i have problem with CPU315-2DP. SP light is on and BF flashing my diagnostic file : Diagnostic buffer of module CPU 315-2 DP Order No./ Description Component Version 6ES7 315-2AG10-0AB0 Hardware 5 - - - Firmware V 2.0.12 Rack: 0 Slot: 2 Event 1 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 36 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.033 PM 06/16/2015 Event 2 of 10: Event ID 16# 2943 I/O access error, writing P area, double-word access, Access address: 50 Requested OB: I/O access error OB (OB122) Priority class: 1 External error, Incoming event 12:47:39.032 PM 06/16/2015 Event 3 of 10: Event ID 16# 39B1 I/O access error when updating the process image input table P area, word access, access address: 10 process image partition no.: 0 not user relevant(Z1): 2942 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.031 PM 06/16/2015 Event 4 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 50 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.029 PM 06/16/2015 Event 5 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 36 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.029 PM 06/16/2015 Event 6 of 10: Event ID 16# 2943 I/O access error, writing P area, double-word access, Access address: 50 Requested OB: I/O access error OB (OB122) Priority class: 1 External error, Incoming event 12:47:39.028 PM 06/16/2015 Event 7 of 10: Event ID 16# 39B1 I/O access error when updating the process image input table P area, word access, access address: 10 process image partition no.: 0 not user relevant(Z1): 2942 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.027 PM 06/16/2015 Event 8 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 50 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.026 PM 06/16/2015 Event 9 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 36 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.025 PM 06/16/2015 Event 10 of 10: Event ID 16# 2943 I/O access error, writing P area, double-word access, Access address: 50 Requested OB: I/O access error OB (OB122) Priority class: 1 External error, Incoming event 12:47:39.024 PM 06/16/2015

Suggestion To thank Quote Answer

6/16/2015 3:09 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 9/4/2024 Posts: 4620 Rating: (707)	Hello, Have some slave connected to Profibus? If yes, have red light lit on BF on your Profibus slave? It's a new installation? Have you download to the CPU the OB 122?

Suggestion To thank Quote Answer

6/16/2015 3:48 PM	Rate (0)
cocu Advanced Member Joined: 6/12/2015 Last visit: 3/16/2024 Posts: 20 Rating: (0)	Ste39 Hello, Have some slave connected to Profibus? If yes, have red light lit on BF on your Profibus slave? It's a new installation? Have you download to the CPU the OB 122? I have e unit working something strange happens to start unit 1 i have to start unit 3. yes there are slave connected. the CPU 315-2DP connected to the DP/DP cupler with optical fiber in distance 150m on profibus slave i don't have BF light on . this istallation is 10 years old i don't make any change to CPU whith OB122. all this is happens when the power of electricity made 2-3 time on-of

Suggestion To thank Quote Answer

6/16/2015 4:33 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 9/4/2024 Posts: 4620 Rating: (707)	cocu Ste39 Hello, Have some slave connected to Profibus? If yes, have red light lit on BF on your Profibus slave? It's a new installation? Have you download to the CPU the OB 122? all this is happens when the power of electricity made 2-3 time on-of Hello cocu, mmmh is possible that the problem is this, the power that comes and goes 2-3 times "quickly"? If you take away power (e.g. 30 seconds and then power on again) starts everything with no problems?
	Last edited by: Ste39 at: 6/16/2015 4:35:26 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users atula

6/16/2015 5:13 PM	Rate (0)
cocu Advanced Member Joined: 6/12/2015 Last visit: 3/16/2024 Posts: 20 Rating: (0)	I have try that nothing happens

Suggestion To thank Quote Answer

6/17/2015 9:53 AM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)	hi cocu, have a look to the module, were the adresses that are mentioned in the diagnostic buffer (10,50) are used. check the wiring and connection on that module. regards
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

6/18/2015 11:57 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	New question published by raxvin is split to a separate thread with the subject Module status for health bit and fault bit. Best regards Min_Moderator
	Last edited by: Min_Moderator at: 6/18/2015 12:44:03 PM
Suggestion To thank Quote Answer

6/18/2015 3:16 PM	Rate (0)
cocu Advanced Member Joined: 6/12/2015 Last visit: 3/16/2024 Posts: 20 Rating: (0)	mopS04 hi cocu, have a look to the module, were the adresses that are mentioned in the diagnostic buffer (10,50) are used. check the wiring and connection on that module. regards Hello, Can you be more specific please. when i read the CPU 315-2DP it says DP slave error address E 1020 when i go to accessible Nodes i can see only 1 unit which has a direct connection but the ather 2 are passive. As i understand it they have connection master and slave,the strange is to start unit 1 i have to start unit 3 this think is first time happens this is how are my connections , Attachment IMG_1184.JPG (308 Downloads)
	Last edited by: cocu at: 6/18/2015 3:27:41 PM
Suggestion To thank Quote Answer

6/18/2015 3:38 PM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)	cocu First of all many thanks to anyone that helps in this forum. I'm new to programming PLC i have problem with CPU315-2DP. SP light is on and BF flashing my diagnostic file : Diagnostic buffer of module CPU 315-2 DP Order No./ Description Component Version 6ES7 315-2AG10-0AB0 Hardware 5 - - - Firmware V 2.0.12 Rack: 0 Slot: 2 Event 1 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 36 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.033 PM 06/16/2015 Event 2 of 10: Event ID 16# 2943 I/O access error, writing P area, double-word access, Access address: 50 Requested OB: I/O access error OB (OB122) Priority class: 1 External error, Incoming event 12:47:39.032 PM 06/16/2015 Event 3 of 10: Event ID 16# 39B1 I/O access error when updating the process image input table P area, word access, access address: 10 process image partition no.: 0 not user relevant(Z1): 2942 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.031 PM 06/16/2015 Event 4 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 50 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.029 PM 06/16/2015 Event 5 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 36 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.029 PM 06/16/2015 Event 6 of 10: Event ID 16# 2943 I/O access error, writing P area, double-word access, Access address: 50 Requested OB: I/O access error OB (OB122) Priority class: 1 External error, Incoming event 12:47:39.028 PM 06/16/2015 Event 7 of 10: Event ID 16# 39B1 I/O access error when updating the process image input table P area, word access, access address: 10 process image partition no.: 0 not user relevant(Z1): 2942 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.027 PM 06/16/2015 Event 8 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 50 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.026 PM 06/16/2015 Event 9 of 10: Event ID 16# 39B2 I/O access error when transferring the process image to the output modules P area, double-word access, access address: 36 process image partition no.: 0 not user relevant(Z1): 2943 Requested OB: Program execution error OB (OB85) Priority class: 26 External error, Incoming event 12:47:39.025 PM 06/16/2015 Event 10 of 10: Event ID 16# 2943 I/O access error, writing P area, double-word access, Access address: 50 Requested OB: I/O access error OB (OB122) Priority class: 1 External error, Incoming event 12:47:39.024 PM 06/16/2015 In your diagnastic buffer are I/O Access-Errors. this is because the CPU can not access to a module. In the entries is also described to which adress the cpu can´t access. And these adresses are 10, 36 and 50. Now have a look in your HW-Config in your S7 HW-config and check where the adresses are used. At this module is the one where your error occurs. hope this helps,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

|

Share this page:

Share this page on...

Follow us on