Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 315-2PN/DP Soft redundancy with SCADA

Created by: Lovins at: 10/12/2012 7:04 AM (5 Replies)

Rating (0)

Thanks 1

6 Entries

10/12/2012 7:04 AM	Rate (0)
Lovins Advanced Member Joined: 1/16/2012 Last visit: 6/1/2023 Posts: 20 Rating: (0)	Hi Guys, I'm using CPU 315-2PN/DP Soft redundancy system and working properly. I need to communicate one SCADA system with it. SCADA system contains WinCC V7.0 SP3 -512 Tag. Can anyone plz suggest me toproceed further. Regards, Lovins.F.

Suggestion To thank Quote Answer

10/12/2012 7:57 AM	Rate (0)
Sulung Bronze Member Joined: 5/26/2007 Last visit: 9/1/2023 Posts: 126 Rating: (3)	when you install software redundancy, you have step 7 block and wincc block. see the manual. use dynamic wizard to do the connection. very easy and simple.

Suggestion To thank Quote Answer

10/19/2012 11:09 AM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 6/15/2023 Posts: 711 Rating: (30)	Dear sulung, can you please point the path where i can get the datails? Regards vipz
	With Best Regards VIPZ
Suggestion To thank Quote Answer

10/22/2012 12:56 AM	Rate (0)
H-H Platinum Member Joined: 7/2/2008 Last visit: 9/14/2023 Posts: 928 Rating: (303)	Hellovipz, Please check chapter 9 (Software redundancy and operator stations with WinCC) in thesoftware redundancy manual. Best regards, H-H

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RIAN Che

10/22/2012 12:52 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 6/15/2023 Posts: 711 Rating: (30)	Thanks dear.
	With Best Regards VIPZ
Suggestion To thank Quote Answer

4/20/2013 7:24 AM	Rate (0)
nandgate Posts: 319 Rating: (9)	Thank you.
nandgate Posts: 319 Rating: (9)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on