Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cpu 315+sinamics+TP177A

Created by: meTRAIAN at: 2/14/2010 9:31 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/14/2010 9:31 PM	Rate (0)
meTRAIAN Posts: 29 Rating: (0)	Hello. I have a liitle problem, hope that somebody can halp me. I have one project that contains:1 cpu 315-2dp, 1 sinamics S120 CU 310 DP, and TP177A. The problem is: Sinamics boot time is longer that CPU boot time, and at power up, if i don't use ob122 the cpu is entering in STOP mode. I copy the ob122 but now the problem is that if I disconnect the TP177, the CPU is still running. Any solution.pls. I suppose that I can program the ob122, but I don't know how. Thank you
meTRAIAN Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

2/15/2010 9:06 AM	Rate (0)
Zenta Silver Member Joined: 10/12/2006 Last visit: 5/24/2023 Posts: 206 Rating: (25)	Hi meTRAIAN, If you go to the hwconfig, and there the cpu properties, there ate a startup tab, and "monitoring time for". Attachment hwconfig.jpg (58 Downloads)

Suggestion To thank Quote Answer

2/15/2010 9:07 AM	Rate (0)
Zenta Silver Member Joined: 10/12/2006 Last visit: 5/24/2023 Posts: 206 Rating: (25)	regards Zenta Attachment hwconfig2.jpg (53 Downloads)

Suggestion To thank Quote Answer

2/15/2010 2:20 PM	Rate (0)
meTRAIAN Posts: 29 Rating: (0)	thank you.
meTRAIAN Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

2/21/2010 1:22 PM	Rate (0)
Zenta Silver Member Joined: 10/12/2006 Last visit: 5/24/2023 Posts: 206 Rating: (25)	You'r welcome :-)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on