Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 928, the led BASP red always on

Created by: Import-User-1 at: 1/17/2013 10:13 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

1/17/2013 10:13 AM	Rate (0)
Import-User-1 Gold Member Joined: 8/10/2005 Last visit: 2/7/2022 Posts: 3609 Rating: (28)	Import of a Technical Question of the User Rony I IS Rony I IS Pls.help I have problem,I cannot run CPU 928, the led BASP red on,while led green Run onand when i switch operator to Stop the led Green Run still on, led stop stil off, I can not go online to the CPU using my PG. Thank you & Regards, Rony

Suggestion To thank Quote Answer

1/17/2013 10:22 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (707)	Hello, I think you have a hardware problem, because you can't go online to read the I-stack it's hard to tell where the problem is If you have a spare rack try to replace the rack . Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

1/17/2013 11:50 AM	Rate (0)
spatil Experienced Member Joined: 3/30/2011 Last visit: 5/10/2023 Posts: 20 Rating: (0)	Hello, Change the Rack power supply aswell if possible. Regards,

Suggestion To thank Quote Answer

1/18/2013 2:21 AM	Rate (0)
Rony I IS Posts: 1 Rating: (0)	Dear Sir, You mean rack for the CPU, not the CPU ? Regards, Rony
Rony I IS Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/18/2013 7:58 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (707)	Hello, Yes, hardware failure in most cases is in the rack or powersupply (my experience) and if a rackfailure dammaged the CPU, you end up with 2 dammaged CPU Regards, Marcjan.
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

11/28/2015 12:14 PM	Rate (0)
Sanjeevkumar Teggin Advanced Member Joined: 2/23/2012 Last visit: 5/11/2023 Posts: 3 Rating: (0)	Hi, I do have a Similar Problem with CPU 928. Did you get any solution then for your CPU problem. Thanks in advance............

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on