Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU version of 1214C

Created by: Farrukh Bhatti at: 8/7/2012 11:39 AM (6 Replies)

Rating (1)

Thanks 6

7 Entries

8/7/2012 11:39 AM	Rate (0)
Farrukh Bhatti Posts: 37 Rating: (1)	Dears, Could some please help me how i can know cpu version is it (V1.0,V2.0,V2.1orV2.2) for 1214C. regrards Farrukh Ijaz
Farrukh Bhatti Posts: 37 Rating: (1)
Suggestion To thank Quote Answer

8/7/2012 11:52 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hi, Connect online with TIA and you will see. There is no other possibility because FW version could be reflashed before and you will not know it untill connect online.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Tomy Master Farrukh Bhatti

8/7/2012 11:53 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, It's written on front of the module and on the box it came with. If you are connected to a CPU, you can upload the configuration of that CPU and then you know the firmware version. Regards, Marcjan
	Last edited by: Marcjan at: 8/7/2012 11:54 AM Darius was faster Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Farrukh Bhatti

8/7/2012 12:30 PM	Rate (0)
Farrukh Bhatti Posts: 37 Rating: (1)	Thanks a lot It works what i see is V2.0.2 is it V2.0.? regards Farrukh Ijaz
Farrukh Bhatti Posts: 37 Rating: (1)	Last edited by: Blue Moderator at: 8/7/2012 1:13 PM new question is splitted to a new thread: /tf/WW/en/Posts/78503#top
Suggestion To thank Quote Answer

8/7/2012 1:55 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/8/2024 Posts: 15388 Rating: (2443)	Farrukh Bhatti Thanks a lot It works what i see is V2.0.2 is it V2.0.? regards Farrukh Ijaz Yes that is V2.0. The latest for that hardware is V2.2 and it is suggested you look into updating to the latest firmware as it provides online changes as an option (without requiring a plc stop in most minor changes - refer to the documentation to see what changes are considered major or require plc stop).
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users UMENCHO Farrukh Bhatti

8/8/2012 11:45 PM	Rate (0)
Farrukh Bhatti Posts: 37 Rating: (1)	Thanks a lot to every one Could you please tell me how i can assign a new Ip address to 1214C in V11 thanks & regards Farrukh Ijaz
Farrukh Bhatti Posts: 37 Rating: (1)
Suggestion To thank Quote Answer

8/9/2012 12:22 AM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/8/2024 Posts: 15388 Rating: (2443)	Farrukh Bhatti Thanks a lot to every one Could you please tell me how i can assign a new Ip address to 1214C in V11 thanks & regards Farrukh Ijaz In section 5.5 of the s7-1200 easy book (page 80 in version 11/2011), title Configuring the IP address of the CPU, it describes in very good detail.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Farrukh Bhatti

|

Share this page:

Share this page on...

Follow us on