Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cpu1214c error blinking

Created by: averos at: 12/10/2016 6:59 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

12/10/2016 6:59 PM	Rate (0)
averos Posts: 2 Rating: (0)	Hi everyone, Actually I run the CPU1214C 1AG40, but i got red led blinking. You can see the buffer, in the attached image, nothing strange but! If someone can help me Attachment error1.PNG (19 Downloads)
averos Posts: 2 Rating: (0)	Last edited by: averos at: 12/10/2016 7:00:48 PM
Suggestion To thank Quote Answer

12/10/2016 9:37 PM	Rate (0)
William_B Posts: 5225 Rating: (1160)	averos Hi everyone, Actually I run the CPU1214C 1AG40, but i got red led blinking. You can see the buffer, in the attached image, nothing strange but! If someone can help me Hi. Could you place the PLC in STOP? Place the PLC in STOP. Notice the occurrence in the diagnostic buffer. (Ensure the "freeze" function is not active.) Notice if the error lamp is ON or OFF. Place the PLC back into RUN. After being properly in RUN, read again the diagnostic buffer from when the PLC was placed in RUN. What are your observations? Please export the diagnostic buffer as text file and add it for us to see. w
William_B Posts: 5225 Rating: (1160)	Last edited by: William_B at: 12/10/2016 9:38:53 PM Last edited by: William_B at: 12/10/2016 9:39:41 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users averos

12/11/2016 3:10 PM	Rate (0)
averos Posts: 2 Rating: (0)	Actually I dn't know how but after going online to the PLC, the error desappeared! now it works perfectly
averos Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

|

Share this page:

Share this page on...

Follow us on