Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU224 and 170B

Created by: trymeagain at: 11/11/2009 6:26 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/11/2009 6:26 AM	Rate (0)
trymeagain Posts: 7 Rating: (0)	Hi! I am having the same proble. I think may be the same machine. I am having two Machines each with their respective CPU and HMI. System 1 is running fine. System 2 HMI is unable to communicate with PLC CPU 224 AC/DC/RLY. When i connect the same HMI to another machine CPU its working but if i connect the same HMI to another CPU with same program its not working. G Getting Error Messages 290027 & 190011............... My cable is alright, its working with machine 2, all my settings are same in both CPU and HMI. ANY Solutions
trymeagain Posts: 7 Rating: (0)	Last edited by: O_Moderator at: 11/11/2009 9:34 AM new subject after splitting from /tf/WW/en/Posts/9488#top
Suggestion To thank

11/11/2009 9:32 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 9/16/2023 Posts: 2683 Rating: (135)	Thread closed, because question is already pblished in the thread with the subject 224 & 170B. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on