Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU312C

Created by: ni1 at: 5/3/2011 3:47 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/3/2011 3:47 PM	Rate (0)
ni1 Posts: 50 Rating: (0)	Dear all, What is the difference between S7300/400MPI and S7-300MPI(PC Adaptor ).? siemens CPU312C is under S7300/400MPI or S7-300MPI(PC Adaptor). Please advise me. Thanks for yours valuable input. Best Regards, ni
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

5/3/2011 6:01 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello, What do you mean? Please clarify your a further out. Basically MPI prorocol is the same in all type of CPUs. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/3/2011 6:58 PM	Rate (0)
ni1 Posts: 50 Rating: (0)	Hello, When I do setting in HMI, I need to set plc type.In PLC type I see S7300/400MPI , S7300MPI(PC adaptor), S7-300 (HMI adaptor),.....So I am not sure which one I need to choose for CPU312C with MPI port. Thanks urs attention on my question. Best Regards, ni
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

5/3/2011 7:21 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	In your case this should be S7300/400MPI. Try it. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on