Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU315 2DP process image position Half in half out

Created by: autom at: 2/1/2010 12:13 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/1/2010 12:13 PM	Rate (0)
autom Posts: 89 Rating: (1)	Dear All, In a factory,because of work memory i want to change the CPU 315-2DP (6ES7 315-2AF03-0AB0) with a new one CPU 315-2DP (6ES7 315-2AG10-0AB0). So i took upload from the project and when i made compile::: The system data could not be recreated because the configuration is inconsistent.The input address range (address 120, length 16 bytes) must either be fully within the process image position or fully outside it. You also can see that at the attatchment. My question is how so long the project wasfine and know i have problems?? The version of step 7 that i have is 5.4 +Sp4. Any sollutions for that problem, without changing the Hardware Configuration, and the functions that calling the specific PIWs. Thangs a lot. Attachment PO_315.JPG (216 Downloads)
autom Posts: 89 Rating: (1)
Suggestion To thank

2/1/2010 1:10 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already published in the thread with the subject CPU 315 process image is half in and half out. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on