Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU414-2DP 6ES7414-2XK05-0AB0 have bug???

Created by: Sasongko at: 6/29/2014 3:49 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/29/2014 3:49 PM	Rate (0)
Sasongko Posts: 87 Rating: (0)	Dear Expert, Have you any experience get some little problem when CPU414-2DP 6ES7414-2XK05-0AB0 connected to HMI MP270? I have just replaced CPU414-1 6ES7414-1XG01-0AB0 with CPU414-2DP 6ES7414-2XK05-0AB0. I don't have original PLC file so I uploaded from the old one. Then I did little configuration, I replaced CPU type in HW Config. I set MPI address and baudrate as the old CPU.Finally I downloaded to new CPU. That's all. But now, HMI MP270 which connected to the CPU sometimes get lag. Present Time and Counter Time at the screen sometimes not changed every second. Is CPU414-2DP 6ES7414-2XK05-0AB0 have bug??? If I update the firmware of CPU, will the problem solved? I am waiting for you sharing. Thank you
Sasongko Posts: 87 Rating: (0)
Suggestion To thank

7/2/2014 2:18 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/28/2025 Posts: 4114 Rating: (195)	closed cause question allready discussed within the existing thread Replace CPU 414-1 to 414-2, MP270 have trouble??? Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on