Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Create a text parameter for use with message text

Created by: martin_f1 at: 7/28/2023 12:59 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/28/2023 12:59 PM	Rate (0)
martin_f1 Joined: 7/3/2023 Last visit: 8/8/2023 Posts: 11 Rating: (0)	Hello, I was wondering how you can use an analog value and make it a text parameter and add it to a message text box? For example, if the analog value is "5", then the parameter will be a text value that you can assign instead of having a bunch of message texts boxes for each of the values? Is that possible?

Suggestion To thank Quote Answer

7/28/2023 1:07 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/8/2023 Posts: 31576 Rating: (3926)	No, this is not possible. You can only evaluate the number and thus switch status name field on or off.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users martin_f1

7/28/2023 1:23 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/8/2023 Posts: 31576 Rating: (3926)	Here's are example for I/O status names in a message text.

Suggestion To thank Quote Answer

7/31/2023 2:33 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/27/2023 Posts: 1192 Rating: (112)	You mean such as in the example? Attachment Analog text.zip (169 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on