Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

creating compact flash card for sinamics s120

Created by: Import-User-1 at: 1/17/2008 10:10 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/17/2008 10:10 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (28)	Importing technical question of a user Hello, In our company we have installed one manipulator which uses SINAMICS S120 system. All parameters for this servo system are stored on compact flash (CF)card. We wish to make one copy of this card to use it as spare CF. We know that we have to get licenced CF from Siemens. But, we are not sure how to make useful copy of user data (parameters)stored on it. Have we use some special programing tool to createacopy (spare card)or can we simply copythe contents of original card to new one? Best regards, Uros
Import-User-1 Posts: 3609 Rating: (28)
Suggestion To thank Quote Answer

1/17/2008 10:35 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 10/2/2023 Posts: 5653 Rating: (763)	Hello, the project is stored in the USER folder in the CF card. You can copy this folder to the new one, or with FW2.5 and starter 4.1.1 you cansave the project in CF card format, and than copy the datas to the card - with theload todata system command (edit menu/load to data system).
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

2/25/2016 1:00 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4792 Rating: (123)	New question published by 10Awq is split to a separate thread with the subject Communication Sinamics S120 CU320 with the new CU320-DP. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on