Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cross sign (x) continuously showing at CU240B-2

Created by: Alamgir Mahmud at: 1/14/2015 7:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/14/2015 7:14 PM	Rate (0)
Alamgir Mahmud Advanced Member Joined: 1/17/2013 Last visit: 9/28/2023 Posts: 39 Rating: (0)	Dear all, I am using CU240b-2. In BOP,cross sign (x) continuously showing. Though I have commissioned the inverter, but motor is not running. I need the answer, cause i am at commissioning stage. The MLFB of the inverter, CU and BOP are given below 1. 6SL3224-0XE41-6UA0 2. 6SL3244-0BB00-1BA1 3. 6SL3255-0AA00-4CA1

Suggestion To thank Quote Answer

1/14/2015 11:44 PM	Rate (0)
Graeme Platinum Member Joined: 6/4/2008 Last visit: 12/2/2023 Posts: 1467 Rating: (319)	Hi, I can only assume the cross you are referring to is the black circle with a cross through it?? This is the Fault/Alarm pending indicator and you will need to discover what this alarm code is and then refer to the List manual to find out the remedy. Regards, Graeme

Suggestion To thank Quote Answer

1/15/2015 8:20 AM	Rate (0)
Alamgir Mahmud Advanced Member Joined: 1/17/2013 Last visit: 9/28/2023 Posts: 39 Rating: (0)	Thank you. Problem has been discovered and solved.

Suggestion To thank Quote Answer

4/22/2015 7:43 AM	Rate (0)
veer Posts: 103 Rating: (0)	dear alamgir, could you please send me this control unit cu240b-2 gsd file . i tried a lot to find this.
veer Posts: 103 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on