Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CSIG Script Highlight object

Created by: schnek at: 5/22/2009 1:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/22/2009 1:39 PM	Rate (0)
schnek Bronze Member Joined: 11/13/2007 Last visit: 10/25/2024 Posts: 41 Rating: (0)	Hello folks! I am using WinCC v7 and Step7 (no PCS7). I am using the basic process control to navigate through the technology. The problem now is, that when I click for instance the "A" (alarm) signal button in the overview buttons, the technology switches to the faulty object, but the error from CSIG script comes in the debug saying: "On CSIG Click: Could not hightlight the object:...". The question is, what do I have to build into this object - a faceplate instance - so that it cooperated with the CSIG program. Thanks for any hints! schnek
	Last edited by: schnek at: 5/22/2009 1:40 PM
Suggestion To thank Quote Answer

5/22/2009 4:32 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 9/26/2024 Posts: 703 Rating: (96)	Hello, the script finds the object which is the message belongs to, do a change of workfield to the picture where the object is showed and highlights it, it means set the "HighlightBlockIcon" property to TRUE. So in your objects you should have something for highlight (for example colored rounding) which visibility is then connected as object property "HighlightBlockIcon" (by default FALSE). Regards Sydney

Suggestion To thank Quote Answer

5/25/2009 6:59 AM	Rate (0)
schnek Bronze Member Joined: 11/13/2007 Last visit: 10/25/2024 Posts: 41 Rating: (0)	Thanks a lot Sydney! Works good. schnek

Suggestion To thank Quote Answer

5/25/2009 8:21 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 9/26/2024 Posts: 703 Rating: (96)	You're welcome .

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on