Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CU 320 version f replacement with version e

Created by: Zyad at: 6/6/2018 1:13 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/6/2018 1:13 AM	Rate (0)
Zyad Posts: 33 Rating: (0)	Dear expert Greetings I have system sinamics s120 with CU 320 6SL3040-0MA00-0AA1 version E CU 320 6SL3040-0MA00-0AA1 version F Question is can you replacement CU Version F with version E on system without any problems in programe
Zyad Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

6/6/2018 6:13 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/1/2023 Posts: 21213 Rating: (2797)	Hello, yes you can. Regards Christoph

Suggestion To thank Quote Answer

6/6/2018 12:39 PM	Rate (0)
Zyad Posts: 33 Rating: (0)	More thanks to answer But replacement without any chang in parameter remove old but new restore program only
Zyad Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

6/6/2018 12:56 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/1/2023 Posts: 21213 Rating: (2797)	Hello, you can use the CF Card from the old one an place it in the new one. If you perform a RAMtoROM on the old asll Parameters stored on the CF Card and loaded during Startup in the new one. Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on