Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CU230P-2PN telegram 999 S7-1200

Created by: PHN2018 at: 4/10/2018 5:17 PM (10 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

4/10/2018 5:17 PM	Rate (0)
PHN2018 Advanced Member Joined: 1/24/2018 Last visit: 9/29/2024 Posts: 36 Rating: (1)	Hi; We try to recuprate information for CU230P in S7-1200 PLC We create a telegamm 999 see image below We use GETIO instruction to read this telegram and we have the error 8090 We attach also the GETIO database I don't see the error that we made Thanks in advance for your support Attachment DB GETIO.PNG (157 Downloads)

Suggestion To thank Quote Answer

4/10/2018 5:18 PM	Rate (0)
PHN2018 Advanced Member Joined: 1/24/2018 Last visit: 9/29/2024 Posts: 36 Rating: (1)	Attachment CU230P telegram.PNG (128 Downloads)

Suggestion To thank Quote Answer

4/11/2018 6:20 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/14/2025 Posts: 22538 Rating: (3051)	Hello, what exactly is the adress 291? The Returncode mean that you use a wrong adress or wrong length of data. Regards Christoph

Suggestion To thank Quote Answer

4/11/2018 7:42 AM	Rate (0)
PHN2018 Advanced Member Joined: 1/24/2018 Last visit: 9/29/2024 Posts: 36 Rating: (1)	ChristophD Hello, what exactly is the adress 291? The Returncode mean that you use a wrong adress or wrong length of data. Regards Christoph Hello, The adresse come from HV01-GP01-interface_profinet-télérgam_libre ID MATERIAL 291 see attach image Attachment CU230P telegram (2).PNG (87 Downloads)

Suggestion To thank Quote Answer

4/11/2018 7:44 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/14/2025 Posts: 22538 Rating: (3051)	Hi, and you really want to read length 0? This is seen in the screen of the GetIO_DB! Regards Christoph

Suggestion To thank Quote Answer

4/11/2018 7:52 AM	Rate (0)
PHN2018 Advanced Member Joined: 1/24/2018 Last visit: 9/29/2024 Posts: 36 Rating: (1)	ChristophD Hi, and you really want to read length 0? This is seen in the screen of the GetIO_DB! Regards Christoph Hi, Ok I check it this morning on site and come back to you Regards Philippe

Suggestion To thank Quote Answer

4/11/2018 2:17 PM	Rate (0)
PHN2018 Advanced Member Joined: 1/24/2018 Last visit: 9/29/2024 Posts: 36 Rating: (1)	PHN2018 ChristophD Hi, and you really want to read length 0? This is seen in the screen of the GetIO_DB! Regards Christoph Hi, Ok I check it this morning on site and come back to you Regards Philippe Hi Christoph, The read length is an output form GETIO function . Have you others idea? Thanks in advance

Suggestion To thank Quote Answer

4/11/2018 2:50 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/14/2025 Posts: 22538 Rating: (3051)	Hello, can you make a screen of the Telegram configuration in TIA, not the interconnection in the drive . Regards Christoph

Suggestion To thank Quote Answer

4/12/2018 12:08 PM	Rate (0)
PHN2018 Advanced Member Joined: 1/24/2018 Last visit: 9/29/2024 Posts: 36 Rating: (1)	ChristophD Hello, can you make a screen of the Telegram configuration in TIA, not the interconnection in the drive . Regards Christoph See image in attachment We have also an alarm A08526 on the SINAMICS. Now if an other solution is available to read a telegram I'm also open Tks Attachment telegram global vue plc.PNG (122 Downloads)

Suggestion To thank Quote Answer

4/12/2018 12:27 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/14/2025 Posts: 22538 Rating: (3051)	Hello, A08526 mean that there is no connection between PLC and Device fort cyclic data. have you check the Name of station and ip Adress of each device?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on