Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CU320-2 DP CONNECTO WITH CPU315-2DP

Created by: IZUCALO at: 1/4/2011 10:23 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/4/2011 10:23 AM	Rate (0)
IZUCALO Regular Member Joined: 5/28/2008 Last visit: 5/8/2024 Posts: 10 Rating: (0)	Dear All I met a problem for use the CPU315-2DP link to CU320-2 DP, After configuration hardware and download , when start CPU it will BF. what I miss cause this problem? Izuca Lo

Suggestion To thank Quote Answer

1/4/2011 12:04 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello, You could start with checking of diagnostic buffer of CPU what is that. Then connection (cable and connectors). Then what GSD file did you use? Or attach here you hardware confuguration... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

1/6/2011 2:52 AM	Rate (0)
IZUCALO Regular Member Joined: 5/28/2008 Last visit: 5/8/2024 Posts: 10 Rating: (0)	Dear Sir The fault by can not read this station PIW & PQW. I'm use the drive ES V5.4 SP2 install in Step 7 V5.4 SP5 . I don't install GSD file for it. I can not upload my file because of always fault when I execute upload process. my file only 1.3M (zip file) Thanks !

Suggestion To thank Quote Answer

1/6/2011 6:40 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Leave for the moment Drive ES5.4. Look at http://support.automation.siemens.com/WW/view/en/25166781 There have explanation how to set hardware configuration. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on