Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Custom HMI datatypes KTP600

Created by: Jeremy Mahieu at: 6/17/2013 10:49 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/17/2013 10:49 AM	Rate (0)
Jeremy Mahieu Posts: 101 Rating: (7)	Are there any restriction to using custom dataypes with KTP600s? I've made the HMI connection with the CPU. I've then made a datatype in the project library. Now I want to add a HMI tag with that datatype, but the datatype is not shown in the list. I've done this with TP1900 panels and it seems to work perfectly fine there.
Jeremy Mahieu Posts: 101 Rating: (7)
Suggestion To thank Quote Answer

6/17/2013 3:58 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, You can only use User_Data_type (UDT) in a faceplate. Configuration instruction for creating faceplates with WinCC Comfort or WinCC Advanced Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

6/17/2013 4:13 PM	Rate (0)
Jeremy Mahieu Posts: 101 Rating: (7)	No, you can use it in the tag table as shown in the screenshot. Works in V11 and V12 with TP1900 HMI. Otherwise I'd have to make hundreds of tags when all my info is already in a block. Attachment TagTable.jpg (472 Downloads)
Jeremy Mahieu Posts: 101 Rating: (7)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on